We are glad to hear you have your kit installed! This is very common since you are using a liquid to install the screen! When the water evaporates, it can cause bubbles. This is completely normal. Give the film a few days to cure and the bubbles will dissipate on their own. Colder temps may delay the curing process. Use heat to help get rid of the remaining pesky bubbles. Let us know if you have no change in the bubbles after a week.
Do's and Don'ts
DO be patient. Bubbles will heal themselves.
DO be aware of your environment. Installing in too hot of weather will make it more difficult to squeegee the film evenly,
Do NOT try to peel the film off after it has started curing. About 3 hours.
Do NOT push bubbles out once the film has been tacked down on the edges and begun to cure. It will stretch the film.
Comments
0 comments
Article is closed for comments.