How do I install my film?

Please visit the full instructions on the website! Your kit will have come with everything you need to install your film.

https://screenprotech.com/pages/how-to

Quick Instructions

1. Clean all surfaces thoroughly.
2. Mist the screen and the both sides of the film.
3. Align film to center of screen; slide to fit equally around all edges. Driver Display film will tuck under bezel.
4. Squeegee film from center outward. Small bubbles in the film are normal. These will dissipate on their own in a few days.
5. Use towel to wipe all excess liquid.

FAQs

• We use a wet installation process. Use the provided spray bottle to mist the screens and the film, then use the towel to wipe excess liquid.
• Clean screens well! Any dust or particles under the film will remain there. Using our install solution works to clean the screen. You can also use Windex or a warm soapy water on a scratch free cloth. Our proprietary Nano Aplica Cleaner with cleaning cloth is our top recommended way to clean any screen.
• Bubbles are normal! After the installation, please give the film 3+ days to full cure and set.
• Use plenty of solution! This prevents air pockets and allows for a smoother installation.
• Wrap the towel around smaller squeegees, or even your finger, to help with smaller pieces.
• The Driver Display film will tuck under the bezel. Use the installation solution to help slide the film under.
• Work slowly! Some screens will be more curved, or larger, and need more patience to lay down.

You can also search YouTube for Screen ProTech and your vehicle to see if there are any specific videos showing the installation. We have tons of people that have made videos showing their installations.  If you would like to join our community and make a video for us, please contact [e-mail].